Advanced quick-acting system for the disinfection and stabilizationof water for domestic use. Broad bactericide, biocide, virucidal spectrum. Thanks to the the chlorine dioxide-based active biocide substance - which is much more effective than traditional disinfectants - it is powerful against Legionella pneumophila and different infective agents. Effective against microorganisms, ideal for collection water of tanks and reservoirs. Product compliant with Regulation UNI-EN 12671 concerning drinking water and approved according to BS EN 1276. CHLORINE DIOXIDE PROPERTIES: Chlorine dioxide shall NOT be mistaken with Chlorine or Hypochlorite or traditional chlorine-based disinfection systems. In fact, unlike the latter, this product does not release any odour, it has a very high residual activity and above all it does not act by colour changes but by oxidation penetrating the bacterial cell wall and eliminating pathogenic organisms. It is much faster (a few dozen times) than traditional methods (i.e. chlorine, glutaraldehyde or quaternary salts). It is stable over a wide pH range (up to pH 12). Due to these properties, it is intended for the treatment of surface water for human feeding. It is in fact used on an industrial scale for the treatment of aquifer water, surface water, for the removal contaminants due to the presence of Iron and Manganese, in the breeding industry, in hospital, out-patient, school and industrial structures thus representing an excellent disinfection and prevention solution. WL-SANIFast destroys biofilms in tanks, pipes and from surfaces in contact with water removing pathogenic agents which grow and reproduce allowing Legionella Pneumophila to spread in hot water systems and in cooling towers. It eliminates sulphate-reducing bacteria and aerobic and anaerobic bacteria in biological slime (bioslime). Its action dramatically reduces metal corrosion phenomena thus contributing to enhance circulation and performance of heat exchangers. MAIN FIELDS OF APPLICATION: Drinking water : Disinfection; Control of trihalomethanes (THMs); Iron and Manganese oxidation; Improved slime sedimentation; Reduction of turbidity and colour; Oxidation of organic pollutants (pesticides, phenols, etc.); Removal of algae and of bad odours. Industrial plants and waste water : Cooling circuits, evaporation towers, etc.; Paper industry, waste and feed water, cellulose bleaching, odour control; Oxidation of organic pollutants (surfactants, phenols, sulphides, cyanides, nitrites, hydrocarbons, etc.). Oil installations : Odour and injection water control; Sulphatereducing bacteria control; Microbiological slime control; Oxidation of hydrogen sulphide. Food production: Disinfection of wash and process water and water for beverage preparation; Disinfection of cooling and waste water; Container disinfection. 20-l jerrican of active principle A + activator product B (concentration 20,000 ppm per litre).

Disinfection time necessary changes according to the kind of bacteria, normally from a few minutes to some hours. A few hours before its use check sanitization has occurred by using the provided test strips. Water will be drinkable when there is a concentration of free chlorine dioxide of around 0,2 - 0,4 ppm. The product may also be measured out partially provided that doses of products A and B are the same. Regarding doses and concentrations see the product technical sheet. Finally check the product by using KIT ClLO2 to make sure thorough disinfection has occurred. Product for professional use.